22243 jobs - 2368 added today
Recruiting? Call us on 786-433-7120
Email me newest jobs similar to this one
9 days ago
only 19 days until close

2nd Shift Tractor/Trailer Diesel Mechanic


Salary band: $10k - $15k
Location: North America, United States, Minnesota
Job type: Permanent
Contact: Anderson Trucking Service
Category: Driver Jobs
Apply
Select how you want to share:
View similar
Job Description

The tractor mechanic is responsible for the inspection, service, and repair of the various types of ATS tractors by using company and industry standard methods and criteria to make sure the tractor is safe to be on the road.

Essential Duties and Responsibilities

  • Perform inspections on company tractors using Company, DOT, and OSHA guidelines to ensure that the tractors are operating safely.
    • Complete DOT inspections on outgoing trucks to verify that all necessary repairs have been made.
  • Performs repairs following company procedures within standard job times to get the drivers back on the road as soon as possible.
  • Performs all necessary/scheduled preventative maintenance services.
    • (i.e., alignment, oil and grease, tune-up, air filters, cooling system, nitrate, rods and mains, water filters)
  • Diagnose and repairs electronic control engines.
  • Train and be a resource to others on communication devices.
    • Document common install procedures and troubleshooting techniques to help train other technicians.
    • Act as subject matter expert and resource to other technicians, drivers, and managers.
  • Work with the safety department to make sure all communications units are hooked up properly and provide the data necessary for electronic logging.
    • Perform a series of diagnostic checks to confirm units are installed properly and feeding the data necessary to support e-log.
  • Work safely and wear all required PPE.
  • Ensure safety procedures are implemented and followed.

Education and Experience

  • Technical knowledge in a maintenance-related field (i.e., automotive, heavy equipment, trailer repair) and demonstrated ability in trailer maintenance and repair (including cutting and welding)
  • Usually gained through 1-2 years of vocational training and/or 1-3 years equivalent related experience.
  • Must be able to operate all related power shop equipment, telephone, and CRT/Personal Computer.
  • Must be DOT certified and forklift certified. Must be able to lift 100 pounds.
  • Brake and ASE air conditioning certifications are preferred.
  • Ability to perform electrical troubleshooting.
  • Ability to read installation manuals and understand manufacturer training.
  • Must have attention to detail.
  • Must be able to meet productivity standard.
  • Strong written and verbal communications, decision-making, problem-solving, and customer service skills are required.
  • Must have read; be familiar with, and able to reference the current DOT Out of Service regulations.

Physical Demands and Work Environment

  • Required to work in a shop environment with exposure to noise and fumes and occasionally outside in cold or hot weather environments.

  • Required to stand or walk for long periods of time.

  • Required to frequently lift and/or move parts or supplies that weigh up to 100 pounds.

  • Required to work occasional Saturdays.

  • Required to walk occasionally; to use hands to finger, handle, or feel objects, tools, or controls frequently; and to reach with hands and arms occasionally.

Competencies

  • Must be self-motivated, able to multi-task and work independently.
  • Must be a team player, amenable to a variety of work projects.
  • Must be analytical with the ability to apply data.
  • Must be proficient in responding to internal and external customer situations, responding to customer needs as required.

  • Must be able to both think creatively and provide creative contributions to projects.

  • Must be able to demonstrate a proactive commitment to ATS corporate values and the success of all staff.

    Measurable Objectives

  • Meets all company and department objectives and deadlines.

  • Follows all company and department policies and procedures.

  • Works within budget that is set for the department.

Job Description

The tractor mechanic is responsible for the inspection, service, and repair of the various types of ATS tractors by using company and industry standard methods and criteria to make sure the tractor is safe to be on the road.

Essential Duties and Responsibilities

  • Perform inspections on company tractors using Company, DOT, and OSHA guidelines to ensure that the tractors are operating safely.
    • Complete DOT inspections on outgoing trucks to verify that all necessary repairs have been made.
  • Performs repairs following company procedures within standard job times to get the drivers back on the road as soon as possible.
  • Performs all necessary/scheduled preventative maintenance services.
    • (i.e., alignment, oil and grease, tune-up, air filters, cooling system, nitrate, rods and mains, water filters)
  • Diagnose and repairs electronic control engines.
  • Train and be a resource to others on communication devices.
    • Document common install procedures and troubleshooting techniques to help train other technicians.
    • Act as subject matter expert and resource to other technicians, drivers, and managers.
  • Work with the safety department to make sure all communications units are hooked up properly and provide the data necessary for electronic logging.
    • Perform a series of diagnostic checks to confirm units are installed properly and feeding the data necessary to support e-log.
  • Work safely and wear all required PPE.
  • Ensure safety procedures are implemented and followed.

Education and Experience

  • Technical knowledge in a maintenance-related field (i.e., automotive, heavy equipment, trailer repair) and demonstrated ability in trailer maintenance and repair (including cutting and welding)
  • Usually gained through 1-2 years of vocational training and/or 1-3 years equivalent related experience.
  • Must be able to operate all related power shop equipment, telephone, and CRT/Personal Computer.
  • Must be DOT certified and forklift certified. Must be able to lift 100 pounds.
  • Brake and ASE air conditioning certifications are preferred.
  • Ability to perform electrical troubleshooting.
  • Ability to read installation manuals and understand manufacturer training.
  • Must have attention to detail.
  • Must be able to meet productivity standard.
  • Strong written and verbal communications, decision-making, problem-solving, and customer service skills are required.
  • Must have read; be familiar with, and able to reference the current DOT Out of Service regulations.

Physical Demands and Work Environment

  • Required to work in a shop environment with exposure to noise and fumes and occasionally outside in cold or hot weather environments.

  • Required to stand or walk for long periods of time.

  • Required to frequently lift and/or move parts or supplies that weigh up to 100 pounds.

  • Required to work occasional Saturdays.

  • Required to walk occasionally; to use hands to finger, handle, or feel objects, tools, or controls frequently; and to reach with hands and arms occasionally.

Competencies

  • Must be self-motivated, able to multi-task and work independently.
  • Must be a team player, amenable to a variety of work projects.
  • Must be analytical with the ability to apply data.
  • Must be proficient in responding to internal and external customer situations, responding to customer needs as required.

  • Must be able to both think creatively and provide creative contributions to projects.

  • Must be able to demonstrate a proactive commitment to ATS corporate values and the success of all staff.

    Measurable Objectives

  • Meets all company and department objectives and deadlines.

  • Follows all company and department policies and procedures.

  • Works within budget that is set for the department.


Email me newest jobs similar to this one

  Back to the top